Other timber types, as Alpilignum him for both chemical and physical deterioration to the (visual impairment, thermal degradation, etc.) as well as against mechanical bozulamalara (rot, crack, etc.) to protect against qualified products should be preferred.

Obvious problems with the color plates at Alpi not, as is also the recommendation.

Recommended for wood coating applications Alpi any method or product is polished with. However, to get the best results, between different products have the following characteristics of the product can be provided with preferred;

• High damping force (ie thinner than the intensity of the product)
• Sarar to / provide resistance against the left of the product
• UV protective products with high

Water-based products, the rate of acid pH (4-6) between the more acidic recommended for hard wood products should be preferred.

For best results before using the product should follow the advice of the manufacturer to use before the actual test should be tested with the polishing stages.

In case of any problems, Alpi Research and Development Department based on old experiences you can provide support in the selection of appropriate polishing.