According to our experience, users still porous Alpi veneer application of recommendations;

Applied with Glue Coating of Üreformal;
Coating density wood about 120-150 gr/m2 to be üreformal glue has been applied to the surface, 100 degree, 2.5 kg/cm2 pressure should be 3 minutes left in the coating presses.

Wax's Applied:
Front Emery: Customer is determined according to their preferences

Fill the Floor (between 2-4 times, preferably 3 times filler)

• First Floor Polyurethane filler
• Drying
• Fine sand (280 sand) hand rub with emery break
• Second Floor Polyurethane filler
• Drying
• Fine sand (280 sand) hand rub with emery break
• Third Floor Polyurethane filler
• Drying
• Emery Fine sand (280 sand) hand rub with emery

Wax

• 2 layer silk matte polyurethane top floor
• Drying
• Emery Fine sand (280 sand) hand rub with emery break
• 1 layer silk matte polyurethane recent times

Used to be thinner and fill with the same brand of polyurethane to your preferences is important.

Problems after the silver polished, the first three floors instead of polyurethane filler is recommended to use 1 layer of polyester filling.