Integrated Wood Industry and Trade Co. Kuriş

MDFkap

On a single sheet of MDF
More ...

YONkap

Yonga sheet of wood with
More ...

EKOkap

According to Fields
More ...

Wood Panel

Precise parts of the tree
More ...

News

Our New Factory
We've moved

Door Sereni
Seren Door Production

Our New Factory
We've started to move

New Products



Bamboo	Walnut

The Recommendations

Practical recommendations about the artificial coating can read can learn from here ... more

Home > Advice > Polishing pores are not

Pores are not recommendations Polishing

According to their experience in the following stages Alpi apply / recommend polishing done.

Applied with Glue Coating of Üreforma
Coating density wood about 120-150 gr/m2 to be üreformal glue has been applied to the surface, 100 degree, 2.5 kg/cm2 pressure should be 3 minutes left in the coating presses.

The implementation of Wax


Emery		120/150/180 sand with emery
First Floor		15 gr/m2 density UV acrylic filling
Drying		80w/cm with 360nm UV lamp
second floor		Fill in the intensity of UV acrylic 20 gr/m2
Drying		80w/cm with 360nm UV lamp
third floor (Ters Yönde)		Fill in the UV intensity between 70 gr/m2
Drying		360nm UV lamp with 3 pcs 80w/cm
Emery		380/400/500 sand with emery
Wax		UV intensity in the acrylic top layer gr/m2 Drying 120/150
Drying		3 units with UV lamp for 5 minutes 80w/cm 360nm

UV drying acrylic varnish on stage instead of the second floor can also be used polüretan upstairs.