Integrated Wood Industry and Trade Co. Kuriş

On a single sheet of MDF
More ...

Yonga sheet of wood with
More ...

According to Fields
More ...

Precise parts of the tree
More ...

Our New Factory
We've moved

Door Sereni
Seren Door Production

Our New Factory
We've started to move

Practical recommendations about the artificial coating can read can learn from here ... more

Home > Woodpanel > WoodPanel processing

There are noticeable fact WOODPANEL JOB

Packaged as sheets in stock and will be expecting be expecting, be left to the bottom of the pile of stacked wedges should be of equal thickness.
Must be disassembled during the use of the packaging sheet Woodpanel.
Use the parts from the packaging size, location and the disassembly conditions (air relative humidity and temperature) must wait in the nearest environment.
Naked parts must be kept away from the polished until damp environment. (8% equilibrium moisture ideal conditions 20 C)
Naked parts of air circulation in excess of the environment should be kept
Naked parts or components should be shut down or be placed on top of equal intervals between the left and stick to the same thickness (screened) must be waiting.
Parts are placed on top of naked, waiting to open when the top of the track may be the hunchback. In this case, part of the base is reversed if the wait will be corrected.
Polishing process of the produced parts must be made as soon as possible.
Sure both surfaces to be polished plate.
Should not be combined with another piece of wood woodpanel parts. If you need to combine the disconnected parts PVA glue with woodpanel should be combined.
Polishing is done, the wood will be cut off contact with the air, and power will not be any hunch.