Artificial coatings, natural trees in the strip after cutting plate, inserted into specific actions were to form the index and this index is obtained by the cut. This method is possible thanks to the emergence of natural products to prevent possible flaws in the trees, in addition to the standard size, color and pattern also provides advantages.

Firm on this issue still needs Alpi market by producing custom solutions to even the direction of the development of manufactured products to the market. Technological research and development at this point Alpi firm and new product development is on a separate attention. Our purpose in this section on the use of Alpi Coating is to advise.

Applied with Glue Coating Üreformaldehit Alpi
Produced in any wood surface with glue Alpilignum pasted. The amount of glue is used to pattern Alpilignum (milling, moire, roots, etc.), and the thickness varies depending on the type of pressing. However, between 1.5-5 bar pressing in the amount of glue to be used 150 gr/m2 URL passed is not recommended. Moreover, as press temperature should be between 85-120 degrees. However, another recommendation of the glue coating similar to the color tone is colored by a tone.

Alpi with Vinyl Coating Applied Adhesives
With all kinds of wood glue to the surface Alpilignum pasted vinyl. Glue amount of glue to be used because of the thermoplastic properties, the amount of adhesive coating to apply to the coating type and precision as measured by the type of pressing should be done. Otherwise, the glue may be an unwanted and the coating surface with sandpaper to remove it is difficult.

However, pressing between 1.5-3.5 bar, the amount of glue to be used should be between 80-100 gr/m2. Moreover, as press temperature should be between 60-90 degrees.

Hot Melt (hot) and Alpi Glue Coating Applied
Any wood surface Alpilignum polyolefin, EVA and polyurethane reactive hot tip can be pasted with glue. This type of glue usually small surfaces, in corners with the help of mechanical megeneli automated systems are used.

We or any other coating applied before the above trial and error method of testing should be done through the front and will receive the most appropriate method should be determined result. Moreover, for each method you want to recommend the application of glue suppliers should be applied.